Pinouts >  Разъемы штатных автомагнитол Mitsubishi  >  Mitsubishi ASX pinouts
18 pin Mitsubishi Head Unit connector layout
Разъем 18 pin Mitsubishi Head Unit
p/n 8740A040. May be installed to ASX 2010-2019 vehicles?

Also for (not tested):

  • 8740A065 (NR-201 JM0RVRA-T)
  • 8740A074 (NR-201 XM0RVR0-T)
  • 8740A075 (NR-201 EM0RVR0-T)
  • 8740A076 (NR-201 UM0RVR0-T)
  • 8740A077 (NR-201 YM0RVR0-T)
  • 8740A112 (NR-201 AM0RVRA-T)

Connector (18-pin, white receptacle), harness connector view

Terminal No. Check item Check condition Terminal voltage
1 AUX/RSES INPUT RIGHT When the sound is input from audio and video adapter/rear display unit 1.2Vrms (AC)
2 AUX/RSES INPUT LEFT When the sound is input from audio and video adapter/rear display unit 1.2Vrms (AC)
6 IE-BUS INPUT RIGHT (+) - -
7 IE-BUS INPUT LEFT (+) - -
8 IE-BUS POWER ON Ignition switch: ACC position 1 V or less
9 IE-BUS (+) Ignition switch: ACC position More than 120mV
10 AUX/RSES INPUT GND Always 1 V or less
15 IE-BUS INPUT RIGHT (-) -
16 IE-BUS INPUT LEFT (-) - -
18 IE-BUS (-) Ignition switch: ACC position More than 120mV

Connector (20-pin,white), harness connector view

Terminal No. Check item Check condition Terminal voltage
21 ACCESSORY (+) Ignition switch: ACC position System voltage (DC)
22 REMOCON Ignition switch: ACC position 3.3V (DC)
23 AUDIO:CAN+ - -
25 SPEAKER RR (+) When the sound is output 0 - System voltage (AC)
26 SPEAKER FR (+) When the sound is output 0 - System voltage (AC)
27 SPEAKER RL (+) When the sound is output 0 - System voltage (AC)
28 SPEAKER FL (+) When the sound is output 0 - System voltage (AC)
29 ILLUMINATION (+) Tail lamp switch: ON System voltage (DC)
30 BATTERY (+) Always System voltage (DC)
31 VEHICLE SPEED PULSE Ignition switch: ON 0 - System voltage (pulse)
32 REMOCON GND Always 1 V or less
33 AUDIO:CAN (-) - -
34 ANTENNA +B Ignition switch: ACC position System voltage (DC)
35 SPEAKER RR (-) When the sound is output 0 - System voltage (AC)
36 SPEAKER FR (-) When the sound is output 0 - System voltage (AC)
37 SPEAKER RL (-) When the sound is output 0 - System voltage (AC)
38 SPEAKER FL (-) When the sound is output 0 - System voltage (AC)
39 ILLUMINATION (-) Always 1 V or less
40 POWER GND Always 1 V or less

Connector (8-pin,gray)

Terminal No. Check item Check condition Terminal voltage
41 VCC (RC6.5V)
  • Ignition switch: ON position
  • Shift lever: R position
5.8 - 7.0V (DC)
42 CAMERA DETECT
  • Ignition switch: ON position
  • Shift lever: R position
0 - 5V (DC)
43 PS-R
  • Ignition switch: ON position
  • Shift lever: R position
System voltage (DC)
45 GND (RC) Always 1 V or less
46 CAMERA SIGNAL
  • Ignition switch: ON position
  • Shift lever: R position
1 Vp-p (AC)
47 SHIELD (CAMERA) Always 1 V or less
48 GND (RC) Always 1 V or less

Connector (16pin,gray)

Terminal No. Check item Terminal voltage
56 SHIELD (MIC) 1 V or less
57 MIC DETECT 1 V or less
63 MIC GND 1 V or less
64 MIC SIGNAL 1 V or less

Pins not mentioned are not connected.
20 pin Mitsubishi Head Unit connector layout
Разъем 20 pin Mitsubishi Head Unit
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка

Additional connector №3

8 pin Mitsubishi Head Unit Camera connector layout
Разъем 8 pin Mitsubishi Head Unit Camera

Additional connector №4

16 pin Honda, Mitsubishi Head Unit Aux connector layout
Разъем 16 pin Honda, Mitsubishi Head Unit Aux
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings