Разъемы автомагнитол Lexus и Toyota  > Toyota pinouts
Matsushita CQ-VS8180AK

Head unit pinout signals explained

Pin
Notation
Pin function

Power pins

B+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
Lin Line out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

T/M This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
16 pin (10+6) Toyota Head Unit proprietary of Toyota 57414 Head Unit схематический вид разъема
Разъем 16 pin (10+6) Toyota Head Unit proprietary
12 pins unspecified схематический вид разъема
Разъем 12 pins unspecified
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.