Automotive Head units pinouts  > Kenwood pinouts
Stereo Line Input to Kenwood head units
13 Pin Female Input Pin
Name
13 Pin Female Input Pin
Number
Direction Input Source Pin
Number
Input Source Pin
Name
Description
Ground 6 <-- 2 Shield Right Audio Input
Right + 8 <-- 1 Center Common Audio Ground
Left + 12 <-- 2 Center Left Audio Input

On the head unit side, pin 9 is connected to pin 3 via a 10K Ohm resistor, this identifies the type of cable to the head unit.

13 pin kenwood e30-0825-05 proprietary of Kenwood Head Unit Auxilliary Input (CA-C1AUX) connector layout
13 pin kenwood e30-0825-05 proprietary connector
at the kenwood cd changer
2 pin RCA plug connector layout
2 pin RCA plug connector
at the Input Source
According to 9 reports in our database (3 positive and 1 negative) this pinout should be correct.

Is this pinout
Kenwood Head Unit Auxilliary Input (CA-C1AUX) visual pinout:
Kenwood Head Unit Auxilliary Input (CA-C1AUX) diagram
click to enlarge
Source(s) of this and additional information: http://nodivisions.com/tech/, http://www.mictronics.de/?page=cdc_proto#Kenwood, http://nodivisions.com/tech/kenwood_aux_adapter/
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.