A-N (Alcatel, ..., NEC) cell phones and Smartphones connectors  > Benefon pinouts
Pin
Number
Pin
Name
Description (may be empty)
1 VCHARGE battery charging voltage IN  (max. 2A)
2 VCHARGE battery charging voltage IN  (max. 2A)
3 VBATTERY 6 V output to accessories (max. 0.5A)
4 V-PROG flash programming voltage (0.5/12 VDC)
5 EXTMIC+PWR external audio from the microphone (typ. 400 mVrms)
6 GND  
7 GND  
8

EXTERP+HOOK

 external audio to the speaker amplifier (220 mVrms)
9 !PTTX external PTT input, 0V active (0/5V)
10 I2C_INT i2c interrupt, radio input    (0/5V)
11 SCL I2C clock
12 SDA I2C data
13 TXD serial out (0/5V)
14 RXD serial in (0/5V)
15 EXTIO  
16 CHGCONT charging control voltage (analog)
16 pin cell phone proprietary of Benefon TDP-40 connector layout
16 pin cell phone proprietary connector
at the bottom of the phone
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Benefon TDP-40 visual pinout:
Benefon TDP-40 diagram
click to enlarge
Source(s) of this and additional information: http://www.eserviceinfo.com/downloadsm/2423/Benefon_Delta.html
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.