A-N (Alcatel, ..., NEC) cell phones and Smartphones connectors  > Bosch pinouts
full pinout
Full pinout for Bosch 909 Dual (without S):
Bottom
Pin
Name Direction Description
1GNDGround, for all Bosch 9xx
2DCD-?-Data Carrier Detect
3DTR-?-Data Terminal Ready
4RTS-?-Ready To Send
5CTS-?-Clear To Send
6DSR-?-Data Set Ready
7IGN-?-Outside Device Present, if so put not more then 2,7 Volt in
8GNDGround
9SPK-?-Speaker, needs to be amplified
10GND ANA-?-Ground analog
11MIC-?-Microphone Elektret
12PHP-?-Phone Present, puts out a LOW, it"s not ground
13HEADSET-?-HeadSet Present, put a LOW in Sounds switched to HeadSet
14TXD-?-Transmit Data
15 -?-that we dont know, but used by Bosch-Applications
16BATT-?-Battery +, max. 10mAmps
17 -?-that we dont know, but used by Bosch-Applications
18RXD-?-Receive Data
19CBUS-?-CBUS for programing the phone - applicable to all Bosch 9xx
20CHARGE-?-Charge + not more than 7 Volts
Pins other than GND, CBUS may be different in other than 909Dual models
20 pin Bosh cell phone proprietary of Bosch 909 Dual, 9xx cell phone connector layout
20 pin Bosh cell phone proprietary connector
at the mobile phone (keypad up)
According to 1 reports in our database (1 positive and 0 negative) this pinout should be correct.

Is this pinout
Bosch 909 Dual, 9xx cell phone visual pinout:
Bosch 909 Dual, 9xx cell phone diagram
click to enlarge
Source(s) of this and additional information: by _neubert_@web.de
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.