Nokia phones connectors pinouts  > Nokia pinouts
Pinouts for the 10 Pin connector on both the types of LCD´s (green PCB and brown PCB)
1 VDD 3.3 V LCD Power
2 Reset ?
3 SDATA Serial Data (Synchronous data - can use SPI port on Microchip PIC MCU"s)
4 SCLK Serial Clock
5 CS Chip Select
6 VLCD 3.3V LCD Power
7 NC Not connected
8 GND LCD Power
9 LED- (0V) Backlight LED Cathode
10 LED+ (6V) Backlight LED Anode

The connector on the LCD Module used in Nokia 6610 phones. Also applicable to Chinese LCD remakes sold as replacement parts (on SparkFun website etc.) This 10 pin connector is used on both types of Color LCDs - the green PCB and brown PCB. View the pictures of the connector as well as how to solder the contacts yourself.!1C97694BF9FB109B!129/

unknown connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Nokia 6610 Color LCD Connector visual pinout:
Nokia 6610 Color LCD Connector diagram
click to enlarge
This page contain parts under Copyright © 2000-2015 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.