O-W (Panasonic, Samsung,...) cell phones and smartphones connectors pinouts  > Siemens pinouts
full pinout
PinPin
Name
Description
1 POWER I/O for charging the battery and for supplying external accessories by reducing standby-time
2 GROUND Digital Ground
3 TX / D+ Out for Serial-Interface, I/O for USB-Interface full-speed 12Mbis/s
4 RX / D- In for Serial-Interface, USB-Interface full-speed 12Mbis/s
5 DATA / CTS I/O Data-Line for accessory-bus, use as CTS in data-operation
6 RTS I/O use as RTS in data-operation
7 CLK / DCD I/O Clock-Line for accessory-bus, use as DTC in data-operation
8 STEREO1_OUT Analog Out, driving ext. left speaker to Pin 9 with mono-headset. Pin 8 and Pin 10 differential mode
9 PHANTOM_BUF_OUT Analog Out, mid voltage, in stereo-mode reference to Pin 8 and Pin 10, in Mono-mode not used
10 STEREO2_OUT Analog Out, driving ext. right speaker to Pin 9 with mono-headset. Pin 8 and Pin 10 differential mod
11 GND_MIC Analog In, for external microphone
12 MICEA_AC Analog In, external Microphone

Source: Original Siemens sm_CX75_M75_L2.5e_R1.0.pdf

12 pin Siemens Slim Lumberg cell phone proprietary of Siemens CX75  connector layout
12 pin Siemens Slim Lumberg cell phone proprietary connector
According to 4 reports in our database (4 positive and 0 negative) this pinout should be correct.

Is this pinout
Siemens CX75 visual pinout:
Siemens CX75  diagram
click to enlarge
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.