APC Back-UPS Office connector pinout

connector wiring scheme

6 pin RJ12 (6P6C) female connector layout

6 pin RJ12 (6P6C) female connector
at the UPS

Pin	Signal	Description
1	<--	Shutdown when set by computer for 1-5 seconds.
2	-->	On battery power
3	-->	Low battery
4	--	Signal ground
5	<--	Begin signalling on other pins
6	N/C

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

Related pinouts:

APC Smart UPS cable

Pinouts.ru > Some peripheral devices pinouts > Pinout of APC Back-UPS Office connector and layout of 6 pin RJ12 (6P6C) female connector	Is it correct?:	may be incorrect
Source(s) of this and additional information: www.apcupsd.com	1 reports
Last updated 2008-06-28 21:56:54. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
8556 hits since January 11, 2008