Pinouts >  Различные устройства  >  Alesis pinouts
9 pin D-SUB male connector layout
Разъем 9 pin D-SUB male
Alesis ADAT synchronization cable

This pinout is for a sony type 422 control of an alesis box, in addition to the ADAT SYNC.
The source ADAT SYNC is straight through, but it is not a 422 pinout. There are four pairs of diffrering signals. Word clock, time code, control data, response data. pin 1-shields, pins 2&6 paired, pins 3&7 paired, pins 4&8 paired, pins 5&9 paired.

The interface connector is a 9-pin D-subminiature female connector. The pin assignment for the CONTROLLER and DEVICE is as shown in the following table.

Controller
Pin name
Controller
Pin
Direction Device
Pin
Device
Pin name
Description
Ground 1 1 Ground  
Receive A 2 2 Transmit A  
Transmit B 3 3 Receive B  
Transmit Common 4 4 Receive Common  
Spare 5 5 Spare  
Receive Common 6 6 Transmit Common  
Receive B 7 7 Transmit B  
Transmit A 8 8 Receive A  
Ground 9 9 Ground  
На распиновку RS-422 ADAT sync cable есть 5 отзыв(а): 3 положительных и 1 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: http://www.alesis.com/downloads/manuals/ADAT-M20_RS422.pdf
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings