GPS, UPS, Switches and other devices cables and adapters schematics
Alesis ADAT synchronization cable

This pinout is for a "sony" type 422 control of an alesis box, in addition to the "ADAT SYNC".
The source "ADAT SYNC" is straight through, but it is not a "422" pinout. There are four pairs of diffrering signals. Word clock, time code, control data, response data. pin 1-shields, pins 2&6 paired, pins 3&7 paired, pins 4&8 paired, pins 5&9 paired.

The interface connector is a 9-pin D-subminiature female connector. The pin assignment for the CONTROLLER and DEVICE is as shown in the following table.

Controller
Pin name
Controller
Pin
Direction Device
Pin
Device
Pin name
Description
Ground 1 1 Ground  
Receive A 2 2 Transmit A  
Transmit B 3 3 Receive B  
Transmit Common 4 4 Receive Common  
Spare 5 5 Spare  
Receive Common 6 6 Transmit Common  
Receive B 7 7 Transmit B  
Transmit A 8 8 Receive A  
Ground 9 9 Ground  
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the cable
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the cable
According to 4 reports in our database (2 positive and 1 negative) this pinout should be correct.

Is this pinout
RS-422 ADAT sync cable visual pinout:
RS-422 ADAT sync cable diagram
click to enlarge
Source(s) of this and additional information: http://www.alesis.com/downloads/manuals/ADAT-M20_RS422.pdf
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.