Hardware pinouts information and cables schemes

Dell PowerEdge 1855/1955 DRAC/MC console cable pinout

connector or cable wiring

bookmark this page

Just very slightly different than a normal DCE-DCE crossover cable.

Device 1
Pin Number
Device 1
Pin Name
Direction Device 2
Pin Number
Device 2
Pin Name
Description (may be empty)
1 DCD   4 DTR  
2 Rx   3 Tx  
3 Tx   2 Rx  
4 DTR   1 & 6 DCD & DSR  Oddly, there's no continuity between 6 and 1 on either side..
5 GND   5 GND  
6 DSR   4 DTR  
7 RTS   8 CTS  
8 CTS   7 RTS  
  RI     RI  pin 9 is not used in this cable

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of Dell PowerEdge 1855/1955 DRAC/MC console cable
Is it correct?:
unknown
Source(s) of this and additional information: one Dell console cable and my multimeter
Contributor: Jeremy Sharp
no reports
Last updated 2008-09-25 21:52:47. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
3543 hits since September 25, 2008