NetApp filer head serial console cable pinout

connector or cable wiring

Pin Number	Pin Name	Direction	Pin Number	Pin Name	Description (may be empty)
					not used
2	Rx		3	Tx
3	Tx		2	Rx
					not used
5	GND		5	GND
					not used
					not used
					not used
					not used

The absolute bare minimum: just Rx, Tx, and GND. No hardware flow control whatsoever.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

9 pin D-SUB female connector

Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of NetApp filer head serial console cable	Is it correct?:	unknown
Source(s) of this and additional information: one NetApp console cable and my multimeter Contributor: Jeremy Sharp	no reports
Last updated 2008-09-25 21:51:28. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
3203 hits since September 25, 2008