PowerCom King UPS cable pinout

connector or cable wiring

UPS Signal Name	DB-9 Male (UPS end)	DB-9 Female (PC end)	PC Signal Name
RxD	1	2
AC Fail	2	9	Contact closure
n/a	3	1	not used
GND	4	5	Common ground
Bat Low	5	6	Contact closure
TxD	6	3
GND	7	8
RTS	8	7
DTR	9	4

AC Fail and Bat Low - normally open (shorted to GND when active).

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

9 pin D-SUB female connector
at the computer

Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of PowerCom King UPS cable and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connector	Is it correct?:	should be correct
Source(s) of this and additional information: UPS FAQ in russian	1 reports
Last updated 2008-06-28 21:56:54. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
13810 hits since March 4, 2005