| UPS Signal Name | DB-9 Male (UPS end) | DB-9 Female (PC end) | PC Signal Name |
| Tx | 7 | 2 | RxD |
| Rx | 9 | 3 | TxD |
| Common | 8 | 5 | GND |
Pins 7 and 8; pins 1 and 4 and 6 shorted at he PC end connector.
|
Tripp-lite SmartPro Cable pinout |
connector or cable wiring |
| Part# 73-0743 (SmartPro UPS). Should work with PowerAlert software.
Pins 7 and 8; pins 1 and 4 and 6 shorted at he PC end connector. Want to add or correct something here? Edit this page! | ||||||||||||||||||
|
|
Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of Tripp-lite SmartPro Cable and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connector |
should be correct | |
|
Source(s) of this and additional information: UPS FAQ in russian
|
3 reports | |
| Last updated 2008-06-28 21:56:54. Edit this page. | Is this document correct or incorrect? What is your opinion? | |
