Tripp-lite OmniPro-450 (675) WinNT Cable pinout

connector or cable wiring

UPS Signal Name	DB-9 Male (UPS end)	DB-9 Female (PC end)	PC Signal Name
Shutdown	2	4	DTR
PWR Fail	5	8	CTS
LOW BATT	6	1	DCD
Common	1,4	5	GND

Pin 7 at the PC end (RTS) connected by R1 2k0 to pin 8 (CTS) and connected by R2 2k0 to pin 1(DCD)

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

9 pin D-SUB female connector
at the computer

Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of Tripp-lite OmniPro-450 (675) WinNT Cable and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connector	Is it correct?:	unknown
Source(s) of this and additional information: UPS FAQ in russian	no reports
Last updated 2008-06-28 21:56:54. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
11049 hits since March 4, 2005