USB 2.0 Disk connector cable pinout

connector or cable wiring

5 pin USB HDD case custom connector layout

5 pin USB HDD case custom connector
at the disk drive board

Enclosure Pin Name	Enclosure Pin Number	Direction	Host Pin Number	Host Pin Name	Description
VCC	5	---	4	VCC	+5v Power
D-	4	<-->	3	D-	Data -
D+	3	<-->	2	D+	Data +
GND	1	---	1	GND	Ground

This odd connector is used on some cheaper USB HDD enclosures. It's similar to the SIL connectors used for headers. The numbering may be reversed to what you have for USB; I arbitrarily numbered the pins.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

4 pin USB A / USB B / mini-USB jack connector layout

4 pin USB A / USB B / mini-USB jack connector
at the computer

Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of USB 2.0 Disk connector cable and layout of 5 pin USB HDD case special connector and 4 pin USB A / USB B / mini-USB jack connector	Is it correct?:	unknown
Source(s) of this and additional information: http://dev.gentoo.org/~redhatter/misc/usbhdd-pinout.png, http://dev.gentoo.org/~redhatter/misc/usbhdd-pinout.svg Contributor: Stuart Longland, Mcgiwer, Amos Bieler	2 reports
Last updated 2010-03-10 22:31:35. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
23261 hits since April 19, 2008