Digital cameras and camcorders interfaces  > Kodak pinouts
This is the layout of the Kodak digital camera interface cable to a pc serial port, (used by KODAK DC40, DC50, DC120, DC240, DC280, DC3400, DC5000, RCA CDS4100, VIVITAR 3500, ROLLEI Model D7COM) to download the stored images from camera to pc.

Kodak USB pinout

USB port specifications are as follows:
Full-speed, 12 Mbps signaling.
Bulk data transfers.

Pin
Number
Pin
Name
Description
1 USB Vcc USB supply voltage from hub
2 DTR RS-232 Data Terminal Ready
3 TxD RS-232 Transmit Data
4 GND Ground
5 RxD RS-232 Receive Data
6 USB D+ USB data (non-inverted)
7 NC No connection (used as key)
8 USB D- USB data (inverted)

Kodak Serial cable pinout

Minidin 8 Pin DB9 Pin Func
1,2,6   not connected
3 3 TxD
4,7,8 5 GND, shorted in cable
5 2 RxD

 

8 pin mini-DIN male connector layout
8 pin mini-DIN male connector
at the camera
9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the computer
According to 4 reports in our database (4 positive and 0 negative) this pinout should be correct.

Is this pinout
Kodak camera serial cable visual pinout:
Kodak camera serial cable diagram
click to enlarge
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.