Bookmark /  Discuss  /  Edit  this page or submit new.
34 pin IDC female connector layout
34 pin IDC female connector
at the controller
34 pin IDC female connector layout
34 pin IDC female connector
at the diskdrive 1 or 2
The ESDI interface requires two cables, one for control and one for data. The control cable is shared between the two drives.

Each drive has each own data cable. By twisting some wires on the control cable it won"t be necessary to set the ID for each drive, since the twist will do the job. Wires 25 to 29 should be twisted between drive 1 & drive 2.

Controller           Drive 2   Twist   Drive 1

+--+                   +--+            +--+

|::|===================|  |============|  |  <-Pin 1
|::|===================| |============| |
|::|===================| |============| |
|::|===================| |============| |
|::|===================| |=====/=====| |
|::|===================| |=====/=====| |
|::|===================| |============| |
+--+ +--+ +--+
Controller Drive 1 Drive 2
Wire 1-241-91-91-9
Wire 25252925
Wire 26262826
Wire 27272727
Wire 28282628
Wire 29292529
Wire 30-3430-3430-3430-34

Data cable

20 PIN IDC FEMALE (To the Controller)
20 PIN IDC FEMALE (To the Drive)

20 PIN IDC FEMALE to the Controller.
20 PIN IDC FEMALE to the Drive.

Controller Drive
Wire 1-201-201-20
Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
Pinouts.ru > Disk drives cables > Pinout of ESDI cable and layout of 34 pin IDC female connector and 34 pin IDC female connector
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.