Various Electronic Devices  > Avocent pinouts
connector of the 4XP / XP4000 / XP4040 / ServSwitch Multi EXP

There are a total of four (4) RJ45 ports on the card numbered from 1 to 4. The topmost port is one (1). This information applies to the rebranded BlackBox card KV1609C Serial Control Card. The information relates to the Avocent/Cybex 4XP/XP4000/XP4040 chassis and the BlackBox ServSwitch Multi EXP chassis.

rear of the XPSI card.
Pin
Name Direction Description
1 DTR Data Terminal Ready
2 RTS Request to Send
3 GND Signal Ground
4 TXD Transmitted Data
5 RXD Received Data
6 GND Signal Ground
7 CTS Clear to Send
8 DSR Data Set Ready
8 pin RJ45 (8P8C) female connector layout
8 pin RJ45 (8P8C) female connector
at the rear of the XPSI card
According to 1 reports in our database (1 positive and 0 negative) this pinout should be correct.

Is this pinout
Avocent / Cybex / BlackBox XPSI and KV1609C serial control cards RJ45 visual pinout:
Avocent / Cybex / BlackBox XPSI and KV1609C serial control cards RJ45 diagram
click to enlarge
Source(s) of this and additional information: Avocent/Cybex
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.