Hardware pinouts information and cables schemes

Rino 110, 120, 130 GPS port pinout

GPS connector or cable wiring scheme

bookmark this page
4 pin Rino custom connector layout
4 pin Rino custom connector
at the data cable, towards GPS unit

Pin Signal Description
1 Power in 4.5 VDC, 0.5A max
2 Data in RS232 Rx
3 Data out RS232 Tx
4 GND  
This is the pinout of the connector on the cable, NOT on the GPS unit itself. May be connected directly to PC serial port.
 
See page 105 of http://www8.garmin.com/manuals/Rino120_OwnersManual.pdf

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Related pinouts:

PC serial port pinout

Pinouts.ru > GPS receivers connectors pinouts listing > Pinout of Rino 110, 120, 130 GPS port and layout of 4 pin Rino special connector
Is it correct?:
should be correct
Source(s) of this and additional information: , http://www8.garmin.com/manuals/Rino120_OwnersManual.pdf
Contributor: , Chups
 1 reports
Last updated 2009-05-13 22:16:23. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
10919 hits since October 27, 2006