NeoGeo Joystick pinout

videogames connector

15 pin D-SUB female connector
at the joystick

Pin	Name	Dir	Description
1	GND		Ground
2	n/c	-	Not connected
3	SELECT		Select Button
4	BUTTOND		"D" Button
5	BUTTONB		"B" Button
6	RIGHT		Right
7	DOWN		Down
8	+5V		+5V (See Notes)
9	BUTTOND		"D" Button
10	n/c	-	Not connected
11	START		Start Button
12	BUTTONC		"C" Button
13	BUTTONA		"A" Button
14	LEFT		Left
15	UP		Up

Pin 8 provides +5v to the controller. This is unused in the original stick, but is mandatory for proper use of the pads and new-style sticks.
There are two D pins. While the controller returns low for both pins 9 and 4, only 4 is 'listened' to by the machine.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

15 pin D-SUB male connector
at the console

Pinouts.ru > Videogames connectors pinouts listing > Pinout of NeoGeo joystick and layout of connector	Is it correct?:	should be correct
Source(s) of this and additional information: Hardware Book, Enzo Contributor: , Alpha	1 reports
Last updated 2009-10-22 23:27:36. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
12353 hits since March 4, 2005