Pinouts >  Распиновки разъемов винчестеров других устройств хранения информации
50 pin IDC male connector layout
Разъем 50 pin IDC male
This connector is mostly used for 2.5 IDE HDD of laptops and some other device. Equal to ATA (44) connector, except 50 pin connector used.

Although there are 50 pins in the plug, the mating receptacle need contain only 44 pins (the removal of pins 5 and 6 provides room for the wall of the receptacle). The first four pins of the connector plug located on the device are not to be connected to the host, as they are reserved for manufacturers use. Pins 5, 6 are keys, and are removed.

Pin Name Dir Description
1     Vendor specific
2     Vendor specific
3     Vendor specific
4     Vendor specific
5     keypin
6     keypin

Note: Direction is Controller relative Devices (harddisks).

50 pin IDC female connector layout
Разъем 50 pin IDC female
На распиновку ATA (50) internal есть 4 отзыв(а): 1 положительных и 1 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: Sci.Electronics FAQ: Repair: Pinouts FAQ
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.