Распиновки разъемов винчестеров других устройств хранения информации
the latest HD MiniSAS connector design for implementing HD SAS External interconnect solutions. Typical application is a SAS link between a SAS HBA to a SAS drive subsystem.

The SFF-8644 is compliant with the latest SAS 3.0 spec, and supports 12Gb/s data transfer protocol. It can support up to 4-ports (4 lanes) of SAS data.

The newer SFF-8644 HD SAS connector interface have essentially replaced the SFF-8643 interface and the older SFF-8088 external, SFF-8087 internal SAS interfaces

A1   Rsv  Reserved
A2   INTL  
A3   GND (shield)   Lane 1 receive
A4   Rx1+
A5   Rx1-
A6   GND (shield)   Lane 3 receive
A7   Rx3+
A8   Rx3-
A9   GND   
B1   Vact   
B2  ModPrsl  shorted to Ground in cable
B3   GND (shield)   Lane 0 receive
B4   Rx0+
B5   Rx0-
B6   GND (shield)   Lane 2 receive
B7   Rx2+
B8   Rx2-
B9   GND   
C1   SCL   eeprom communication in cable
C2   SDA   eeprom communication in cable
C3   GND (shield)   Lane 1 transmit
C4   Tx1+
C5   Tx1-
C6   GND (shield)   Lane 3 transmit
C7   Tx3+
C8   Tx3-
C9   GND   
D1   Vact   Sideband 5
D2  Vman   eeprom power in cable
D3   GND    
D4   Tx0+ Lane 0 transmit
D5   Tx0-
D6   GND (shield)
D7   Tx2+   Lane 2 transmit
D8   Tx2-
D9   GND (shield)
36 pin SFF-8644 Mini SAS HD external receptacle схематический вид разъема
Разъем 36 pin SFF-8644 Mini SAS HD external receptacle
at the backplane
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
This page contain parts under Copyright © 2000-2018 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.