Bookmark /  Discuss  /  Edit  this page or submit new.
50 pin hi-density D-SUB female connector layout
50 pin hi-density D-SUB female connector
at the controller & devices
50 pin hi-density D-SUB male connector layout
50 pin hi-density D-SUB male connector
at the cable
Pin Name Dir Description
1-25GND---Ground
26DB0<->Data Bus 0
27DB1<->Data Bus 1
28DB2<->Data Bus 2
29DB3<->Data Bus 3
30DB4<->Data Bus 4
31DB5<->Data Bus 5
32DB6<->Data Bus 6
33DB7<->Data Bus 7
34PARITY<->Data Parity (odd Parity)
35GND---Ground
36GND---Ground
37GND---Ground
38TMPWR<->Termination Power
39GND---Ground
40GND---Ground
41/ATN<--Attention
42n/c-Not connected
43/BSY<->Busy
44/ACK<--Acknowledge
45/RST<->Reset
46/MSG-->Message
47/SEL<->Select
48/C/D-->Control/Data
49/REQ-->Request
50/I/O-->Input/Output
Note: Direction is Device relative Bus (other Devices). Not sure about numbering. May be reversed.
Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
Pinouts.ru > HDD connectors pinouts > Pinout of SCSI-II external, Ultra SCSI (Single-ended) and layout of 50 pin hi-density D-SUB female connector and 50 pin hi-density D-SUB male connector
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.