Kenwood Head Unit Auxilliary Input (CA-C1AUX) pinout

audio or video connector or cable

13 pin kenwood e30-0825-05 custom connector layout

13 pin kenwood e30-0825-05 custom connector
at the kenwood cd changer

13 Pin Female Input Pin Name	13 Pin Female Input Pin Number	Direction	Input Source Pin Number	Input Source Pin Name	Description
Ground	6	<--	2	Shield	Right Audio Input
Right +	8	<--	1	Center	Common Audio Ground
Left +	12	<--	2	Center	Left Audio Input

On the head unit side, pin 9 is connected to pin 3 via a 10K Ohm resistor, this identifies the type of cable to the head unit.

Want to add or correct something here? Edit this page!

2 pin RCA plug connector
at the Input Source

Pinouts.ru > Audio / Video hardware connectors pinouts listing > Pinout of Kenwood Head Unit Auxilliary Input (CA-C1AUX) and layout of connector and 2 pin RCA plug connector	Is it correct?:	may be incorrect
Source(s) of this and additional information: http://nodivisions.com/tech/, http://www.mictronics.de/?page=cdc_proto#Kenwood, http://nodivisions.com/tech/kenwood_aux_adapter/ Contributor: , rafi	6 reports
Last updated 2009-08-17 19:22:00. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
18211 hits since October 27, 2006