|
Pin Number |
Pin Name |
Description |
| 1 | LED+ | Grey |
| 2 | IN R |
Brown |
| 3 | OUT R | Red |
| 4 | OUT L | Black |
| 5 | GND (signal) | Green & Shield wire |
| 6 | ON | Connect to pin 7 |
| 7 | +5V | |
| 8 | GND (amp) | Yellow & Blue |
| 9 | IN L | Purple |
If the switch does not work, try to change connection between pin 7 and 1. The amplifier should turn on when there is +5V at pin 6.
Subwoofer amplifier is turned on with the sattelites, there is no separate circuit for turning the subwoofer on.
Hope this will help. Have fun and don't fry something. ^ ^
правильный
с ошибками