Pinouts >  Распиновки разъемов аудио/видео техники

4 pins connector
Used in PA and home speaker connections.

If only a single speaker connection is made, the first two pins are typically used. If a a speaker requires separate amplifiers for low and high frequencies (called bi-amplification,) the low frequencies are usually wired to the first pair, and the high frequencies are wired to the second pair.

 

Pin
Name

Pin
Number

Description

1+

Positive 1

This pin carries the signal from amp to the speaker

1-

Negitive 1

This pin carries the negative back to the amplifier (of channel one)

2+

Positive 2

Second positive from amp

2-

Negative 2

Second negative back to amplifier from speaker (of channel 2)

 

Peavey use 2+ and 2- to connect hi frequency output from bass bin crossover to feed tops, in which case a cross over cable is required.

SpeakOn cable connector

Статус распиновки: +4 -0
На распиновку Four Pole Neutrik Speakon connector есть 4 отзыв(а): 4 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.