20 pin Philips A/V proprietary of Philips V2020/1/2/3 VCRs AV conector connector layout
20 pin Philips A/V proprietary connector
at the Philips VCR
The Philips VCRs, V2020, V2021, V2022 & V2023 have a 20-pin A/V connector through which all signals must be connected. Philips provided a breakout box

f you wish to get External Video in to a V2020/1/2/3 then the signal needs to be amplifed and fed to Pin 17. Similarly Video Output from Pin 18 needs to be buffered before it can drive a 75 ohm line.
PinFunction
1External Audio Input.
2Audio Output. Internal feed to UHF Modulator.
3+12Vd.c. Output.
4Test Point for Bias adjustment
5Camera Remote Out
6External ON (XON): Goes High when channel "00" is selected.
7Remote in. (Data via Camera)
8Voltage Actuator Added.
9Head to Frame Added Pulse.
10Ground for Head Frame Added.
11Muting: Low is no signal applied.
12NOT REC: Goes low in Record mode,
13Mute All: Goes low when External Video In is selected.
14Mute Sound: Goes Low when External Audio In is selected.
15Playback envelope track sensing. (Envelope Curve)
16Ground for Pin 15.
17External Video Input.
18External Video Output.
19NOT PB. Goes low in Playback mode.
20Ground for Pin 1.
Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
Pinouts.ru > Audio / Video hardware connectors > Pinout of Philips V2020/1/2/3 VCRs AV conector and layout of 20 pin Philips A/V special connector
This page contain parts under Copyright © 2000-2014 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.