Tandberg and Sanako RJ12 headsets pinout

audio or video connector or cable

6 pin RJ12 (6P6C) male connector
at the headset

Pin Number	Color	Description (may be empty)
1	Blue	Microphone signal
2	White	Right audio channel
3	Red	Left audio channel
4	Green	Left ground
5	Yellow	Right ground
6	Black	Microphone ground

The pins on this headset use the same levels as a regular microphone and pair of stereo headphones; a simple adapter can be made using two 3.5mm barrel connectors.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

Pinouts.ru > Audio / Video hardware connectors pinouts listing > Pinout of Tandberg and Sanako RJ12 headsets	Is it correct?:	unknown
Source(s) of this and additional information: http://hh2k.homelinux.org/blog/archive/2008/07/14/tandberg-educational-headset.aspx Contributor: Don_HH2K	no reports
Last updated 2009-01-24 23:13:03. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
2949 hits since January 25, 2009