Hardware pinouts information and cables schemes

ATX Form Factor card pinout

motherboard connector

bookmark this page
x pins UNKNOWN connector layout
x pins UNKNOWN connector

The ATX Form Factor Card is used to upgrade AT motherboards to meet ATX standards and support PC97, PC98 specificatioin.

Numbering may be reversed on some motherboards. Check the key position first.
Something
Pin		 Name Direction Description
1 USB +5V -?-  
2 USB Port 0 - -?-  
3 USB Port 0 + -?-  
4 GND -?-  
5 n/c -?-  
6 PS/2 Mouse CLK -?-  
7 GND -?-  
8 IR Receive -?-  
9 +5 V -?-  
10 USB +5V -?-  
11 USB Port 1 - -?-  
12 USB Port 1 + -?-  
13 GND -?-  
14 n/c -?-  
15 PS/2 Mouse DTA -?-  
16 GND -?-  
17 IR Receive -?-  
18 IR Transmit -?-  
Some reports are to swap mouse CLK and mouse DATA as this: Mouse DATA is 11 (6), CLK is 12 (15).


Alternative
Pin USB 1 USB 2 PS/2 Mouse Infrared
1+5V DC  " "
2 +5V DC  
3Data -   
4 Data -  
5Data +   
6 Data +  
7Ground   
8 Ground  
9  +5V DC 
10    
11  Mouse Clk 
12  mouse Data 
13   Ground
14  Ground 
15   IR Hi
16   Id in
17   +5V DC
18   IR Out

Want to add or correct something here? Edit this page!
Pinouts.ru > Motherboard connectors pinouts > Pinout of ATX Form Factor card and layout of connector
Is it correct?:
should be correct
Source(s) of this and additional information: comp.sys.cbm General FAQ v3.1 Part 7 from Hardware Book
 3 reports
Last updated 2008-06-28 21:56:54. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
27598 hits since March 4, 2005