Pinouts >  Распиновки разных разъемов на материнской плате
10 pin IDC male connector layout
Разъем 10 pin IDC male
at the motherboard (pin 8 is removed)
Intel HD Audio analog front panel dongles can support up to two analog audio jacks, each of which signals user connection, or disconnection.

 

Pin
Number		 Pin
Name		 Description
1   PORT 1L   Analog Port 1 - Left channel (Microphone) 
2   GND   Ground
3   PORT 1R   Analog Port 1 - Right channel (Microphone) 
4   PRESENCE#    Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected. 
5   PORT 2R   Analog Port 2 - Right channel (Headphone) 
6   SENSE1_RETURN   Jack detection return for front panel (JACK1) 
7   SENSE_SEND    Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network 
8   KEY   No pin
9   PORT 2L   Analog Port 2 - Left channel (Headphone) 
10   SENSE2_RETURN   Jack detection return for front panel (JACK2) 

Consult the "Front Panel I/O Connectivity Design Guide", p. 22 for more details

Статус распиновки: +2 -0
На распиновку Intel High Definition Audio connector есть 2 отзыв(а): 2 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: http://www.formfactors.org/developer/specs/A2928604-005.pdf
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.