Hardware pinouts information and cables schemes

Razer Barracuda AC-1 Front Panel Audio Connector pinout

audio video cable or connector

bookmark this page

Pinout listing for front panel audio connector (labeled J26 on the card)

PinPin
Name
Description
1 Mic Input Signal Front panel microphone input signal (biased when supporting stereo microphone)
2 Analog Ground Ground used by analog
3 Mic Power Microphone power / additional MIC input for stereo microphone support
4 +5V Filtered +5 V used by analog audio circuits
5 Right Channel Audio to front Right channel audio signal to front panel (headphone drive capable)
6 Right Channel Audio from front Right channel audio signal return from front panel (when headphones unplugged)
7 Analog Ground Ground used by analog audio circuits
8 No Pin  
9 Left Channel Audio to front Left channel audio signal to front panel (headphone drive capable)
10 Left Channel Audio from front Left channel audio signal return from front panel (when headphones unplugged)

Pinout of the connection for front panel audio on the Razer Barracuda AC-1 sound card


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinouts.ru > Computer multimedia pinouts listing > Pinout of Razer Barracuda AC-1 Front Panel Audio Connector and layout of connector
Is it correct?:
unknown
Source(s) of this and additional information: /www.razersupport.com
Contributor: Greg
no reports
Last updated 2008-06-28 21:56:54. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7506 hits since April 22, 2008