Hardware pinouts information and cables schemes

Ethernet 1Gb crossover cable pinout

network cable scheme

bookmark this page

1Gb ethernet is autosensing, so crossover usually not needed

Cross over patch for 1 Gb Ethernet
T568B     
Name NIC1 ColorNIC2 ColorName
(BI_DA+)Pair2.11White/Orange  3Pair3.1  (BI_DB+)
(BI_DA-)Pair2.22Orange  6Pair3.2  (BI_DB-)
(BI_DB+)Pair3.13White/Green  1Pair2.1  (BI_DA+)
(BI_DC+)Pair1.24Blue  7Pair4.1  (BI_DD+)
(BI_DC-)Pair1.15White/Blue  8Pair4.2  (BI_DD-)
(BI_DB-)Pair3.26Green  2Pair2.2  (BI_DA-)
(BI_DD+)Pair4.17White/Brown  4Pair1.2  (BI_DC+)
(BI_DD-)Pair4.28Brown  5Pair1.1  (BI_DC-)

Want to add or correct something here? Edit this page!
Pinouts.ru > Network cables schematic pinouts listing > Pinout of Ethernet 1Gb crossover cable and layout of 8 pin RJ45 (8P8C) male connector and 8 pin RJ45 (8P8C) male connector
Is it correct?:
should be correct
28 reports
Last updated 2008-06-28 21:56:54. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
57282 hits since March 4, 2005