| Name | AUI1 | AUI2 | Name |
|---|---|---|---|
| TxD A | 3 | 5 | RxD A |
| RxD A | 5 | 3 | TxD A |
| TxD B | 10 | 12 | RxD B |
| RxD B | 12 | 10 | TxD B |
And make the following jumper at each end:
| Name | Pin |
|---|---|
| Vc | 6 |
| Collision Detect B | 9 |
|
Ethernet AUI to AUI cable pinout |
network cable scheme |
| This cable can be used to connect to network interface cards (with AUI connector) together, without use of transcievers
And make the following jumper at each end:
Want to add or correct something here? Edit this page! | ||||||||||||||||||||||||||||
|
|
Pinouts.ru > Network cables schematic pinouts listing > Pinout of Ethernet AUI to AUI cable and layout of 15 pin D-SUB male connector and 15 pin D-SUB male connector |
should be correct | |
|
Source(s) of this and additional information: Usenet posting by Andrew J V Yeomans and Ren? Guzm?n
|
3 reports | |
| Last updated 2008-06-28 21:56:54. Edit this page. | Is this document correct or incorrect? What is your opinion? | |