Casio Cassiopeia E-125, BE-300, EG-800, EM500 cradle connector pinout

PDA connectors and cables

x pins UNKNOWN connector
at the device (display up, power is on the left side, headphone is on the right side)

Pin	Pin Name	Description
1	ADPIN	(?) Diode Cathode, from USB+5V
2	XSEL0	unconnected ?
3	GND
4	SEL0	connect to GND
5	SEL1	connect to GND
6	SEL2	connect to R-divider: 10k to GND, 4.7k to USB+5V
7	MPX0	unconnected ?
8	MPX1	unconnected ?
9	CTS	UART TTL level CTS
10	DCD	UART TTL level DCD (connect to 14, 15)
11	RX	UART TTL level RX - receive data
12	TX	UART TTL level TX - transmit data
13	RTS	UART TTL level RTS
14	DTR	UART TTL level DTR (connect to 10, 15)
15	DSR	UART TTL level DSR (connect to 10, 14)
16	MPX9	unconnected ?
17	+DATA	USB data Positive
18	-DATA	USB data Negative
19	V3	Power +3.3V from Cassiopeia
20	ADGND	USB GND

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

Pinouts.ru > PDA, HandHeld computers ports pinouts > Pinout of Casio Cassiopeia E-125, BE-300, EG-800, EM500 cradle connector and layout of connector	Is it correct?:	unknown
Contributor: GrayCat	no reports
Last updated 2008-06-28 21:56:54. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7713 hits since June 20, 2007