Hardware pinouts information and cables schemes

Handspring Visorphone battery pinout

PDA connectors and cables

bookmark this page
x pins UNKNOWN connector layout
x pins UNKNOWN connector
at the battery

The Handspring Visorphone was a cellular phone attachment marketed for the Handspring Visor series of handhelds. After Handspring's merger with Palm in 2003, it became difficult to obtain replacements.

Pin
Number		 Pin
Name		 Description (may be empty)
1 GND Ground
2 TEMP Stops charging if battery temperature becomes too high
3 Vin Lithium-ion battery, 3.6v
4   Not connected

Pin 1 is closest to the center of the battery; Pin 4 is closest to the edge of the battery.

According to Handspring's specifications, 4 to 6 volts can be applied across Vin to charge the battery.


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
at the phone
Pinouts.ru > PDA, HandHeld computers ports pinouts > Pinout of Handspring Visorphone battery
Is it correct?:
unknown
Contributor: Don_HH2K
 no reports
Last updated 2009-01-24 23:15:15. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
2223 hits since January 25, 2009