| DB9F | Signal | Cradle | Signal |
| 1 | CD | ||
| 2 | RXD | 6 | TXD |
| 3 | TXD | 8 | RXD |
| 4 | DTR | ||
| 5 | GND | 1 | GND |
| 6 | DSR | 10 | Gen.Purpose Output |
| 7 | RTS | 5 | CTS |
| 8 | CTS | 7 | RTS |
| 9 | RI | ||
| Shield | 10nF capacitor to ground | ||
| 4 | HotSync switch | ||
| 9 | HotSync switch live (to 3.3V via 330 ohms) | ||
| 3 | Gen.Purpose Input | ||
| 2 | NC |
|
Palm Pilot cradle cable pinout |
PDA connectors and cables |
Want to add or correct something here? Edit this page! | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Pinouts.ru > PDA, HandHeld computers ports pinouts > Pinout of Palm Pilot cradle cable and layout of 9 pin D-SUB female connector and 10 pin PALM special connector |
should be correct | |
|
Source(s) of this and additional information: Palm cradle
|
3 reports | |
| Last updated 2008-06-28 21:56:54. Edit this page. | Is this document correct or incorrect? What is your opinion? | |
