Hardware pinouts information and cables schemes

Apple IIc to Imagewriter II printer pinout

cable wiring

bookmark this page

This cable will allow you to connect the Apple IIc to the Apple Imagewriter II printer

Device 1
DIN Pin Number
Device 1
Apple Pin Number *
Device1
Pin Name
Direction Device 2
Pin Number
Device 2
Pin Name
Description (may be empty)
1 1 HSKo -> 2 HSKi Handshaking
4 2 TxD -> 5 RxD- Data
2 3 GND   4,8 GND,RxD+ Ground 
5 4 RxD <- 3 TxD- Data 
3 5 HSKi <- 1 HSKo Handshaking

  The Imagewriter's pin 6 and 7 are not used.  This is equivalent to the Apple IIc Peripheral-8 Cable (A2C4312.)

 

*  Please note:  Apple's numbering scheme for its' DIN-5 ports do not follow the DIN specification.  Both are provided for convenience.


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinouts.ru > Parallel interfaces and ports cables schemes > Pinout of Apple IIc to Imagewriter II printer
Is it correct?:
unknown
Contributor: matthew becherer, matthew becherer
no reports
Last updated 2009-03-01 22:20:22. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
2398 hits since February 21, 2009