PDA, Tablet PC, MP3 players and other portable devices  > Casio pinouts
Cassiopeia cradle connector
Pin Pin
Name
Description
1 ADPIN (?) Diode Cathode, from USB+5V
2 XSEL0 unconnected ?
3 GND  
4 SEL0 connect to GND
5 SEL1 connect to GND
6 SEL2 connect to R-divider: 10k to GND, 4.7k to USB+5V
7 MPX0 unconnected ?
8 MPX1 unconnected ?
9 CTS UART TTL level CTS
10 DCD UART TTL level DCD (connect to 14, 15)
11 RX UART TTL level RX - receive data
12 TX UART TTL level TX - transmit data
13 RTS UART TTL level RTS
14 DTR UART TTL level DTR (connect to 10, 15)
15 DSR UART TTL level DSR (connect to 10, 14)
16 MPX9 unconnected ?
17 +DATA USB data Positive
18 -DATA USB data Negative
19 V3 Power +3.3V from Cassiopeia
20 ADGND USB GND

 

td align=


unknown connector
at the device (display up, power is on the left side, headphone is on the right side)
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Casio Cassiopeia E-125, BE-300, EG-800, EM500 cradle connector visual pinout:
Casio Cassiopeia E-125, BE-300, EG-800, EM500 cradle connector diagram
click to enlarge
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.