Cable for 12VDC, Remote Mute
| Radar Detector Pin Name |
Radar Detector Pin Number |
Direction | Wires Pin Number |
Wires Pin Name |
Description |
| LED | 1 | --> | 1 | LED | 12VDC In -> 470-Ohn -> Power LED-> Detector -> Alert LED -> 2N3904 -> 680k -> Ground & 10k ->Pin 2 |
| 12+ | 2 | <-- | 2 | 12+ | 12VDC Positive |
| GND | 3 | <-- | 3 | GND | Ground |
| Mute | 4 | <-- | 4 | Mute | Remote Mute - Use N/O Switch - Terminate after switch with 470-Ohm |
There is a report that +12v is at pin 4.
Comment from Paul Gardner
I think where the power lines are all depends on what you are usind as the cord if you are using a standard telephone cable (rj11) with the 4 connectors I think you have the correct diagram. However if you are usind a CAT4 cable then you are still looking at the middle to wires for the power and groung but now they are pins 3 and 4
правильный
с ошибками