MP3 плееры и гаджеты  > Handspring pinouts

Pinout of the Visor Deluxe PDA. Serial port voltages are 3.3V.
Pin 1 is on the left, as the Visor Deluxe lies screen down on a table with the connector nearest you and the Springboard slot furthest away from you.
Connector at the Bottom of the PDA

Bottom of the PDA
Name Direction Description
1 RX Data 3.3V input to Visor Deluxe serial port.
2 Keyboard Detect 3.3V input to notify Visor Deluxe of presence of external keyboard. Pull to Ground will force Handspring RX to accept serial keyboard.
3 Hotsync interrupt 3.3V input to notify Visor Deluxe that Hotsync button on cradle was pushed. Pull to Ground to activate Hotsync.
4 Ground Ground
5 USB + Data USB D+ line
6 USB - Data USB D- line
7 VDock Voltage from cradle. Connects internally to some Springboard modules to recharge onboard batteries. No connection to Handspring IC's. Goes to Springboard expansion slot thru polyfuse.
8 TX Data 3.3V output from Visor Deluxe serial port. In remote kayboard mode supply up to 3mA @ 3.0V. Directly connectet to CPU UART pin.


8 pins unspecified схематический вид разъема
Разъем 8 pins unspecified
8 pins unspecified схематический вид разъема
Разъем 8 pins unspecified
На эту распиновку есть 2 отзыв(а): 1 положительных и 1 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации:,
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.