The point of sale (POS) is the time and place where a retail transaction is completed. The POS in various retail situations would use customized hardware and software tailored to their particular requirements. Retailers may utilize weighing scales, scanners, electronic and manual cash registers, EFTPOS terminals, touch screens and a variety of other hardware and software available.

Show device-specific * / Casio / Citizen / Costar / Datalogic / ELO / Epson / HP / Koamtac / LS / Metrologic / Motorola / NCR / Nurit / PSC / Symbol / TaoTronics / Targa / Uniden / Welch / Wincor / WisDor / Wurth pinouts only (please note that filtering may not be accurate) or follow to 1 OLD hardware pinouts.
  • 8 pin Powered USB connector drawing
    Powered USB PoweredUSB provides a single cable connection that supplies both the standard USB signals and two additional wire pairs for extra power. The design of PoweredUSB and it connectors allow hot-plugging. PoweredUSB mostly maintained and supported in the point-of-sale environment.

Casio Pinouts

Citizen Pinouts

Costar Pinouts

Datalogic Pinouts

ELO Pinouts

Epson Pinouts

HP Pinouts

  • HP A799 POS receipt printer cable HP A799 POS receipt printer cable. Uses 24V Poweredusb connector. Other end is a proprietary? connector with locking mechanism. Pins counted from left to right with blank side of connector down.

Koamtac Pinouts

  • 8 pin UC-E6 like-mini-usb proprietary connector drawing4 pin USB A plug connector drawing
    Koamtac USB Barcode Scanner KDC200 and others. Pins 1-4 on the USB A connector are connected to pins 1-4 on the UC-E6 connector. Pins 5-8 are not connected.

LS Pinouts

Metrologic Pinouts

Motorola Pinouts

NCR Pinouts

  • 9 pin D-SUB male connector drawing
    NCR serial powered port This is the cable connector for NCR powered serial connector, as found on the realpos series.

Nurit Pinouts

PSC Pinouts

Symbol Pinouts

TaoTronics Pinouts

Targa Pinouts

Uniden Pinouts

Welch Pinouts

Wincor Pinouts

  • 6 pin mini-DIN male (PS/2 STYLE) connector drawing9 pin D-SUB female connector drawing
    Wincor Nixdorf BA63 BA66 pole display This cable breaks out the "PS/2" connector inside the display housing into a serial cable and a 12VDC power supply. Also make sure you ground the shells together to provide a ground for the TxD signal path.

WisDor Pinouts

  • 4 pin RJ11 male connector drawing9 pin D-SUB female connector drawing
    WisDor ECR RS-232 cable RS-232 communication cable for the RS-232 equiped (for e.g. CR6X series) WisDor Electronic Cash Machines.

Wurth Pinouts


 
Copyright © 2000-2023 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutGuide.com
Change privacy settings