Pinouts >  Распиновки кабелей и разъемов оборудования торговой точки: сканнеров, принтеров, касс  >  Metrologic pinouts
10 pin RJ50 (10P10C) male connector layout
Разъем 10 pin RJ50 (10P10C) male
at the cable
The MS9590 and MS9591 scanner interfaces terminate to a 10-pin modular jack. The serial number label indicates the interface enabled.

MS9590-14 or MS9591-14 

Pin
Number		 Pin
Name		 Description
1 Ground  
2 Transmit RS232 Output
3 Receive RS232 Input
4 RTS RS232 Output
5 CTS RS232 Input
6 DTR RS232 Input
7 Reserved  
8 DSR TTL Output
9 +5VDC  
10 Shield Ground

 

 

MS9590-47 or MS9591-47
Keyboard Wedge and Stand-Alone Keyboard

Pin
Number		 Pin
Name		 Description
1 Ground  
2 Transmit RS232 TTL
3 Receive RS232 TTL
4 PC Data TTL
5 PC Clock TTL
6 KB Clock TTL
7 Reserved  
8 KB Data TTL
9 PC +5VDC  
10 Shield Ground

 

 

MS9590-38-EAS
USB and RS232 Transmit/Receive with EAS  

Pin
Number		 Pin
Name		 Description
1 Ground  
2 Transmit RS232
3 Receive RS232
4 EAS -  
5 EAS+  
6 D+  
7 PC +5V Detect Input
8 D-  
9 PC +5V Power
10 Shield Ground

 

MS9590-106 or MS9591-106
RS485, USB 

Pin
Number		 Pin
Name		 Description
1 Ground  
2 Transmit RS232 TTL
3 Receive RS232 TTL
4 IBM +  
5 IBM -  
6 D+  
7 PC +5V Detect Input
8 D-  
9 PC +5V Power
10 Shield Ground

  

MS9590-40-EASUSB RS485  with EAS 

Pin
Number		 Pin
Name		 Description
1 Ground  
2 Transmit RS232
3 Receive RS232
4 EAS -  
5 EAS+  
6 D+  
7 PC +5V Detect Input
8 D-  
9 PC +5V Power
10 Shield Ground

Refer to manual for additional pinouts of cables and connectors.

Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: Single-Line Hand Held Laser Scanner Installation and Users guide
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.