Point Of Sale Devices: scanners, printers, cash registers cables and connectors pinouts  > Welch pinouts
for Scanteam 8300-4 check/MSR/barcode reader. Differs from 8300-1, 8300-2.
back of the 8300-4
Pin
Name Direction Description
1 Logic Ground  
2 VCC (+5vdc) For supplying +5 VDC to the scanner
3 RXD Receive data (RS-232 voltages)
4 CTS Clear to Send (RS-232 voltages)
5 KbdDataIn Keyboard wedge data (from a keyboard)
6 KbdClkIn Keyboard wedge clock (from a keyboard)
7 RDATA -?- OCIA
8 Data ready -?- OCR, or 5B RX/TX
9 Vin(+12vdc) +12 VDC input, optional if +5 VDC is supplied
10 Bootstrap Short to ground to enable bootstrap mode
11 TXD Transmit data (RS-232 voltages)
12 RTS Request to Send (RS-232 voltages)
13 KbdDataOut Keyboard data (to computer)
14 KbdClkOut Keyboard clock (to computer)
15 5B RX2/TX2 -?- 5B RX/TX (inverted)
15 pin D-SUB female connector layout
15 pin D-SUB female connector
at the back of the 8300-4
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Welch Allyn Scanteam 8300-4 visual pinout:
Welch Allyn Scanteam 8300-4 diagram
click to enlarge
Source(s) of this and additional information: Michael Graff
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.