Amiga 500/600/1200 Power Supply pinout

connector or cable wiring scheme

x pins UNKNOWN connector
at the motherboard

Pin	Name
1	+5V
2	Shield Ground
3	+12V
4	Signal Ground
5	-12V

Note: The Amiga 500/600/1200 power supply input is identical in shape to that of the Commodore C128, but they are *not* compatible. Using The Amiga:s PSU on a C128 or vice versa will most likely kill your hardware!!!!!!!

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!

Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing > Pinout of Amiga 500/600/1200 Power Supply and layout of connector	Is it correct?:	should be correct
Source(s) of this and additional information: Amiga Power Supply pinouts at National Amiga, from Hardware Book Contributor: , Mattias Johansson	2 reports
Last updated 2009-03-01 22:33:59. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
18275 hits since March 4, 2005