Pinouts >  Распиновки последовательных портов  >  IBM pinouts
IBM ThinkPad 100/LexMark Lexbook SE10 floppy/serial connector

 

Pin
Number
Pin
Name
Dir Description
1 /RDD Read data from drive
2 GND   Ground
3 /HS Head select
4 /DS Drive select
5 /IDX Index sensor
6 /WP Write protect sensor
7 /TR0 Track 0 sensor
8 /STEP Move drive head
9 /DIR Head direction
10 /MO Motor on
11 /DCHG Disk  changed sensor
12 /WE Write enable
13 GND   Ground
14 /WD Write data to drive
15 +5V   Drive power supply
16 DCD* Data carrier detect
17 +5V   Drive power supply
18 RXD* Receive data
19 TXD* Transmit data
20 DTR* Data terminal ready
21 GND*   Ground
22 DSR* Data set ready
23 RTS* Request to send
24 CTS* Clear to send
25 +5V   Drive power supply
26 RI* Ring indicator

Note: All pins marked with * belong to the serial port, the rest belong to the floppy.

Due to the power saving features of the chipset, both power and data may be switched off when not in use.

The connector is a 26-pin AMPLIMITE .050 III series socket at the computer and plug at the cable.

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings