Hardware pinouts information and cables schemes

Serial (Printer) pinout

serial interface

bookmark this page
25 pin D-SUB male connector layout
25 pin D-SUB male connector
at the printer

Pin Name Dir Description
1SHIELD---Shield Ground
2TXD-->Transmit Data
3RXD<--Receive Data
4n/c-Not connected
5n/c-Not connected
6DSR<--Data Set Ready
7GND---System Ground
8DCD<--Data Carrier Detect
9n/c-Not connected
10n/c-Not connected
11?-->Reverse Channel
12n/c-Not connected
13n/c-Not connected
14n/c-Not connected
15n/c-Not connected
16n/c-Not connected
17TTY-TXD-->TTY Receive Data
18n/c-Not connected
19n/c-Not connected
20DTR-->Data Terminal Ready
21n/c-Not connected
22n/c-Not connected
23?-->TTY Receive Data Return
24?<--TTY Transmit Data Return
25TTY-RXD<--TTY Receive Data

Want to add or correct something here? Edit this page!
Pinouts.ru > RS-232 and other serial ports and interfaces pinouts listing > Pinout of Serial (Printer) and layout of 25 pin D-SUB male connector
Is it correct?:
should be correct
Source(s) of this and additional information: Hardware Book, Petr Krc
 3 reports
Last updated 2008-06-28 21:56:54. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
28057 hits since March 4, 2005