Pinouts >  RS-232 and other serial ports and interfaces  >  Sun pinouts
25 pin D-SUB female connector layout
25 pin D-SUB female connector
at the computer
This port is located in SUN Sparcs such as SUN LX/Classic/SS4/5/10/20 and has both serial ports (A/B) in the same connector. Simply plugging in a regular serial cable in results in accessing port A.
Pin Name Port Dir Description
2 TXD A --> Transmit Data
3 RXD A <-- Receive Data
4 RTS A --> Request to Send
5 CTS A <-- Clear to Send
6 DSR A <-- Data Set Ready
7 GND - - System Ground
8 CD A <-- Carrier Detect
11 DTR B --> Data Terminal Ready
12 CD B <-- Carrier Detect
13 CTS B <-- Clear to Send
14 TXD B --> Transmit Data
15 TC A --> Transmit Clock from DCE, usually not used
16 RXD B <-- Receive Data
17 RC A <-- Receive Clock from DCE, usually not used
18 TC B --> Transmit Clock from DCE, usually not used
19 RTS B --> Request to Send
20 DTR A --> Data Terminal Ready
21 TCO A --> Transmit Clock from DTE, usually not used.
25 TCO B --> Transmit Clock from DTE, usually not used.
Note: Direction is DTE (Computer) relative DCE (Modem).
Note: Do not connect SHIELD(1) to GND(7).
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Source(s) of this and additional information: SUN Field Engineer Handbook, VolumeII, 12/15/93, from Niklas Edmundsson
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.