A serial cable is a cable used to transfer information between two devices using a serial communication protocol. The form of connectors depends on the particular serial port used. A cable wired for connecting two DTEs directly is known as a null modem cable.

Skip to / Cisco / Cyclades pinouts
  • 9 pin D-SUB female
    Epson Serial/RS-232 Cable DB9 to DB25 for Epson Thermal/Impact Receipt Printer Cable Pinouts
  • 9 pin D-SUB female
    LapLink serial cables Will work with LapLink from Travelling Software
  • 9 pin D-SUB female
    Modem cables This cable should be used for DTE to DCE (for instance computer to modem) connections with hardware handshaking.
  • 25 pin D-SUB female
    Nullmodem adapter This adapter will enable you to use a normal serial cable as a nullmodem
  • 9 pin D-SUB female
    RS-232 serial cable DE-9 to DE-9, DE-9 to DE-25 cables. Use this cable to connect two devices equipped with serial RS-232 interface. This cable may be used to connect any RS-232 equipped device to computer, connect two computers via COM serial port and so on. RS232 cable colors included.
  • 9 pin D-SUB male
    Selta programmer cable Use this cable to to program Selta telephone
  • 9 pin D-SUB female
    Serial (9 pin) port Loopback this adapter is used for diagnostic of rs-232 de-9 serial port
  • 9 pin D-SUB male
    Serial dsub9 to dsub25 adapter schematic This adapter will enable you to connect a 25 pin serialcable to a 9 pin connector at the computer
  • 25 pin D-SUB female
    Serial port Loopback (25 pin) Used to verify the port is functional.
  • 9 pin D-SUB female
    Serial Printer (9-25) cable Use this cable between computer (DTE) and printer (DTE) devices.
  • 9 pin D-SUB male
    Serial Printer (9-25) CITIZEN CBM 1000 II cable For models CITIZEN CBM 1000 II printers
  • 9 pin D-SUB female
    Serial Printer (9-25) Epson cable For most of models Epson printers
  • 6 pin Simcard proprietary
    Smart card (Sim card) to PC adapter cable (sim reader/writer) schematic used to to connect computers to ISO 7816 compatible chip card systems (e.g. GSM mobile phones or pay-TV decoding systems)
  • 4 pin USB A receptacle
    USB cable schematic Very simple. Maximum length of cable is about 5 m for AWG20 and 0.8 m for AWG28 cable.
  • 34 pin M/34 male
    V.35 crossover cable cable for wiring DCE with DCE or DTE with DTE devices

Cisco pinouts

Cyclades pinouts


 
Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru