Cisco EIA/TIA-530 DTE cable (DB60 to DB25) cable распиновка и описание @ pinouts.ru

Cisco Part#: CAB-530MT=

60 Pin¹	Signal	25 Pin	Signal	Direction DTE DCE²
J1-11 J1-12	TxD/RxD+ TxD/RxD-	J2-2 J2-14	BA(A), TxD+ BA(B), TxD-
J1-28 J1-27	RxD/TxD+ RxD/TxD-	J2-3 J2-16	BB(A), RxD+ BB(B), RxD-
J1-9 J1-10	RTS/CTS+ RTS/CTS-	J2-4 J2-19	CA(A), RTS+ CA(B), RTS-
J1-1 J1-2	CTS/RTS+ CTS/RTS-	J2-5 J2-13	CB(A), CTS+ CB(B), CTS-
J1-3 J1-4	DSR/DTR+ DSR/DTR-	J2-6 J2-22	CC(A), DSR+ CC(B), DSR-
J1-46 J1-47	Shield_GND MODE_2	J2-1 -	Shield -	Shorted
J1-48 J1-49	GND MODE_1	- -	- -	Shorted
J1-5 J1-6	DCD/DCD+ DCD/DCD-	J2-8 J2-10	CF(A), DCD+ CF(B), DCD-
J1-24 J1-23	TxC/RxC+ TxC/RxC-	J2-15 J2-12	DB(A), TxC+ DB(B), TxC-
J1-26 J1-25	RxC/TxCE+ RxC/TxCE-	J2-17 J2-9	DD(A), RxC+ DD(B), RxC-
J1-44 J1-45	LL/DCD Circuit_GND	J2-18 J2-7	LL Circuit_ GND	-
J1-7 J1-8	DTR/DSR+ DTR/DSR-	J2-20 J2-23	CD(A), DTR+ CD(B), DTR-
J1-13 J1-14	TxCE/TxC+ TxCE/TxC-	J2-24 J2-11	DA(A), TxCE+ DA(B), TxCE-

Arrows indicate signal direction: indicates DTE to DCE, and indicates DCE to DTE.

¹ Any pin not referenced is not connected.
² The EIA-530 interface cannot be operated in DCE mode. A DCE cable is not available for the EIA-530 interface.

This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.

распиновка разъема

Cisco EIA/TIA-530 DTE cable (DB60 to DB25) cable - распиновка